Hi Anthony, I am not a roofer but I can give you the name of a good one, They did several on our street alone and we are all very happy with their work.

We have a 1600 square foot 60 year old home with a 20 year old extension. All the plywood sheathing on the original section had to be replaced. The new portion of the house was shingled after removing the original ones. We also had additional siding replaced on part of the house. We paid just under $12,000 two years ago. My neighbor across the street had all of the above plus gutters. They liked them so much, that their daughter had them do her house.

You can use various materials in the gutter to select, from vinyl and plastic to aluminum and steel. Aluminum has the perfect strength to hold the water and lasts longer, but it is expensive too. Don’t get upset! There is an easy-to-install gutter available for do-it-yourselfers, which can work as well as aluminum ones. So let’s see how to install gutters by yourself.

Gutters collect the rainwater and dispose of it properly to the ground. The rainwater protective guard on the fascia will protect your landscape and prevent erosion & basement flooding. So it is No. Doubt. Necessary!.

What do you need to install gutters?

Materials required:

• Gutter
• Gutter sealant
• Gutter flashing
• Gutter hanging strap
• Elbows
• Downspouts
• ¼ inch screws (hex head or stainless steel screw)
• Lag screws or 1 ¼” screw

Tools used:

• Cordless drill
• Extension ladder
• Crimper
• Hex head driver (if getting hex head screws)
• Duckbill tin snips

Get the materials and toolkit ready before starting off. And make sure to get the additional materials as well, if in case there you need it. Having things on hand before starting off will help in saving time and staying calm during gutter installation

• Planning

Planning is needed before starting anything. So take out the blueprint of the house and mark the locations for installing the gutter.

• Measuring the Roof for Gutter

While measuring the roof, go through its length (cover the roof edges around the house) and take cautions like:

-Don’t lean without support,

-Place a ladder on the even ground, and ask someone to hold it (if necessary), and

-Wear shoes having enough grip.

-Cut the Gutters pipes

When cutting the gutters, use a hacksaw or heavy-duty tin snips. If you are using a hacksaw, hold the frame of the gutter with one and use the dominant hand to hold the saw and move it back and forth slowly.

• Join the Gutter Pipes

- First, lay the base of the gutter sealant on the edges, covering the area of around 1 ½ inch.

- The next step is to connect the corner piece with the gutter, utilize the notch for the proper fixing and snap it along.

- The last step is to secure it with the ⅛ inch rivets using a rivet gun. Caulk the seam with sealant from inside and put a dab of it on rivets too.

- The joining section is over. Always remember! It’s better to join the parts on the ground rather than climbing the ladder and struggle with the process while balancing on it

• Add the downspout Outlets

The channel will need a spot for disposing the water to its desired place and the bridge between them is downspout outlets.

If the gutter runs 40ft or more, have the downspout outlets located at both ends. Before marking the spot of the downspout outlet, reconfirm how many inches away you want it to be. It is 2inches inside the wall, in general.

– Mark the outlet with the pen or marker at the center of the bottom side of the gutter.

– Cut it using a tin snip start from the center and then run it along the highlighted area.

– Now apply the sealant, fix the downspout outlet, and snap it. Fix it with the ⅛” rivets.

– Close it with a cap.

• Fix the Brackets Carefully

Start off with nailing the ½ inch beneath the shingles and then move ¼ inch downward every 10ft. You can change the distance according to the length of the gutter. Use a string line and chalk to mark the positions.

Fix them on the fascia at the marked area. Drill the ⅛ inch hole right through the fascia and wood rafter rails using a cordless drill. Now attach the ¼ inch lag screws or hex head screw using the tool required to fix it.

• Mount and secure the Gutter on Brackets

Now using an electric drill, create a 3/16 inch hole at the front side of the gutter and put the 1” machine screw through the hole, and secure it with the flanged nut.

Attach the gutter to the fascia by fastening the screw from the backside of it to the drain spout. Punch in the 1 ¼” hex head screw using the electric drill at the distance of every 2 foot along with the gutter runner.

Before punching in the screw, check the alignment and assure it is going along with the marked position.

• Fasten Brackets On the wall

Without brackets, it will get difficult to have them stick to the wall. And if, in any case, the water overflows or there is a leak from the elbows, it will directly result in the rotting of the wall or wood of the face board. You don’t want that, right?

• Attach Downspout via Outlet

Crimp the 1 ½ inch of the elbow end using a crimper to implant it with one another easily. Fix it with screws.

Now add the downspout to the outlet and make sure it is in the proper direction for the drainage.

Close the brackets and secure them with sealants and screws. And let them settle down overnight. And the Gutter Installation is done!

For more such content, keep following Interior Craze.

Source:-

Follow Interiorcraze for more tips and tricks!!

Seamless gutters are a great investment for your home because they’re long-lasting, effective at protecting your home from the elements, and require little maintenance to keep them in good shape. To function at peak efficiency, they require professional installation. You need an expert gutter contractor to help you make the most of your investment. Your gutter contractor should be licensed, insured, reputable, local, and be able to demonstrate their workmanship and experience.

So, in opinion if you are looking for the best gutter installation service provider in Hampton and its surrounding areas, you can contact Topstream exterior services, provides both residential and commercial power washing and gutter services.

Thanks for reading! I hope this answer helped you out!

Gutter installation and replacement experts are professionals who specialize in the design, installation, and replacement of gutter systems for residential or commercial properties. These professionals have expertise in assessing a building's needs, recommending suitable gutter materials, and ensuring proper installation or replacement. They may also be knowledgeable about local building codes and regulations related to gutter systems. Gutter experts typically offer services such as custom fitting, downspout installation, and addressing drainage issues. Hiring these specialists ensures that gutters are installed correctly, promoting effective water management and preventing potential issues like leaks or water damage.

Seamless gutters are a great investment for your home because they’re long-lasting, effective at protecting your home from the elements, and require little maintenance to keep them in good shape. To function at peak efficiency, they require professional installation. You need an expert gutter contractor to help you make the most of your investment. Your gutter contractor should be licensed, insured, reputable, local, and be able to demonstrate their workmanship and experience.

So, in opinion if you are looking for the best gutter installation service provider in Hampton and its surrounding areas, you can contact Topstream exterior services, provides both residential and commercial power washing and gutter services.

A good gutter company will have the testimonials to back them up. You want to choose a company that has been doing business for a while, providing quality services. You can get an idea of a gutter company’s reputation by visiting their website and viewing their testimonials section. Choosing the best gutter company means not only receiving quality service but being left with a quality gutter system that will last for years to come. Are you in need of gutter repair services? Carolina Gutters is one of the gutter installation Best Gutter Companies in Charleston SC delivering professional gutter cleaning services at affordable prices.

Vinyl and aluminum gutters are considered the two best types of gutters because they are cost efficient, meaning that for what they cost , they do their job well. And they are not over the top expensive either. Stainless steel gutters are another great option , but they come with a heftier price tag.

Here is my list of the 3 best Gutter guards.

1.Raptor Gutter Guard in Stainless Steel Micro Mesh, Contractor -Grade DIY Gutter Cover,

2. Flex Point 30 Year Gutter Cover System

3. Gutter Brush Simple Gutter Guard for Standard 5″ Gutters Easy no tools.

Gutter guards have been known to reduce the frequency of gutter cleanings.

Well the decision to hire a professional gutter cleaning service or do it yourself in Long Island depends on your personal experience and comfort level with gutter cleaning. If you have experience and feel confident doing it yourself, then it may be a cost-effective option. However, if you're not experienced or have a two-story home, it may be safer and more efficient to hire a professional. Professional gutter cleaners have the right equipment and safety gear, as well as the expertise to identify and address any gutter issues. Additionally, they can save you time and hassle, and provide a more thorough and effective cleaning. Overall, it's best to weigh the pros and cons and make the decision that's best for you and your home. For more tips and tricks on gutter cleaning, check out Clean Pro Gutter Cleaning.

When it comes to the cost of installing seamless gutters in CT (Connecticut), it can vary depending on several factors such as the size of your home, the length of the gutters needed, the material chosen, and the complexity of the installation. It's best to get a personalized quote from a reputable gutter installation company in your area. They will assess your specific needs, provide an accurate estimate, and guide you through the process. Keep in mind that while cost is an important factor, it's also crucial to consider the quality of materials and workmanship. Seamless gutters offer numerous benefits, including reduced maintenance and fewer potential points of failure. For more information and tips on gutter cleaning, I recommend checking out Clean Pro Gutter Cleaning where you can find helpful resources and insights to keep your gutters in great shape.

Ah, the wonders of vinyl gutters! If you're looking to install new vinyl gutters, it's actually a fairly straightforward process that you can tackle yourself with a bit of DIY spirit. First things first, make sure you have the necessary tools and materials, such as vinyl gutters, downspouts, brackets, screws, and sealant. Start by measuring the length of your roofline and determining the proper slope for water drainage. Then, attach the brackets to the fascia board, ensuring they're evenly spaced and securely fastened. Next, snap the vinyl gutter sections into the brackets, making sure they align properly and creating a seamless fit. Don't forget to attach the downspouts at the appropriate locations for water flow. Lastly, seal any joints and connections with a reliable gutter sealant to prevent leaks. Remember, it's always a good idea to consult the manufacturer's instructions and guidelines for specific installation steps. If you want more tips and tricks in gutter cleaning and maintenance, be sure to check out Clean Pro Gutter Cleaning.

It’s important to choose a gutter contractor with a great reputation. You should always check references when hiring a seamless gutter contractor — from others they’ve worked for, and even worked with. If they are known for high-quality work in the community, you can trust they’ll work hard to live up to their reputation. When comparing contractors, follow up with their previous clients to make sure their work has held up and the customers were satisfied with the way the job was completed.

I personally recommend you to check Topstream exterior services portfolio, provides both residential and commercial power washing and gutter services.

Vinyl and atomic number 13 gutters area unit thought of the 2 best kinds of gutters as a result of they're value economical, which means that for what they value , they are doing their job well. and that they aren't over the highest big-ticket either. stainless-steel gutters area unit another nice choice , however they are available with a heftier tag.

Here is my list of the three best Gutter guards.

1.Raptor Gutter Guard in stainless-steel small Mesh, Contractor -Grade DIY Gutter cowl,

2. Flex purpose thirty Year Gutter cowl System

3. Gutter Brush easy Gutter Guard for normal for normal simple no tools.

Gutter guards are renowned to cut back the frequency of gutter cleanings.

Method 1 of 3:Installing Snap-on Guards

Specific steps vary by design, so read your product’s manual carefully. Installing your guards incorrectly could cause your gutters to malfunction. Additionally, you’ll void your warranty if you don’t follow the manufacturer’s installation instructions.

2. Lift the shingles carefully with a putty knife.

Starting at the end of the gutter run opposite the downspout, insert your putty knife between the shingles and the underlayment, which is the roof’s waterproof barrier. Don’t lift the underlayment from the roof’s wooden structure. Carefully loosen about halfway up the first row of shingles, or just enough to accommodate the edge of the guard.

Take care not to damage the shingles when you lift their edges. If you accidentally crack a shingle, slide the guard section into place, then use a putty knife to apply roofing cement over the crack.

3. Slide the back edge of the guard section under the shingles.

Align the guard section with the roofline, then insert it under the shingles you’ve lifted. Continue to lift shingles and slide in the gutter guard until you’ve reached the end of the first guard section.

Most products come in 4 to 6 ft (1.2 to 1.8 m) sections. If you have trouble handling a section on your own, recruit a helper to hold 1 side of the guard steady while you work from the other side.

4. Clip the front of the section onto the gutter’s lip.

The exact process varies by product, so check your installation guide. In general, align the outer edge of the guard section with the rim of the gutter. Then pinch the clipping mechanism over the gutter’s lip to snap the guard into place.

Continue until you’ve finished snapping the rest of the guard section into place. Some products have several individual clipping mechanisms. For others, the clipping mechanism runs continuously along the outer edge.

5. Overlap the sections by ⁄2 in (1.3 cm), unless directed otherwise.

Repeat the steps to install the remaining guards. Many manufacturers recommend overlapping the sections by ⁄2 to 1 ⁄2 in (1.3 to 3.8 cm), especially if you’re installing meshes or grates. However, check your installation guide and follow your product’s specific instructions.

If you need to cover a corner, you can simply butt-join most mesh or grate guards, or line up 1 section perpendicular to another. However, for some systems, you’ll need to cut miter joints in guard sections that meet at corners.

6. Cut miter joints to connect hooded covers at corners.

For hooded surface-tension guards, sections that meet at corners require miter joints. Use a miter box or protractor to measure a 45-degree angle in the end of a guard section. Mark the angle, then trim the end with tin snips or a utility knife.

Repeat the steps to cut a corresponding 45-degree angle into the end of another guard section. The pair of adjoining sections can now meet at a corner without leaving any of the gutter uncovered.

Before cutting, double check that you’ve aligned the sections correctly. Make sure the sides that slide into the roofline face inward and the ones that connect to the gutter face outward.

7. Trim the end of the last guard section with a utility knife or tin snips.

When you’re near the end of the gutter run, measure the distance between the last guard section and the end of the gutter. If it’s shorter than a full guard section, cut one to match that length, then snap it into place.

Suppose your total gutter length is 150 ft (46 m), and your sections are 4 ft (1.2 m). After installing 37 full-sized sections, you’ll have 2 ft (0.61 m) leftover, and you’ll need to cut a section to match that size.

You’ll need a good pair of tin snips to trim a metal gutter guard. Products made of plastic are easier to cut, so you’ll probably only need a utility knife or box cutter.

Method 2 of 3:Mounting Screw-Fastened Guards
1. Install support brackets, if necessary.

Some surface-tension covers are secured with brackets, which are screwed into place along the roofline. If your guard system includes brackets, mount them with 3 in (7.6 cm) self-tapping roofing screws. Check the installation guide and space the brackets along the roofline as directed.

To maintain a watertight seal, apply a small amount of roofing cement around the screws that secure the brackets to the roof.

Brackets are more common in top-quality gutter guard systems, which are often professionally installed.

2. Slide the back edge of the guard under the shingles.

Carefully loosen the bottom edges of the first row of shingles. Then slide the inside edge of the first guard section beneath the shingles.

Take care not to loosen the underlayment, or the waterproof layer, beneath the shingles. Slide the guard section into place between the shingle layer and the underlayment, not between the underlayment and the roof deck.

3. Mount the guard to the gutter lip with self-tapping metal screws.

If your guard system didn’t come with screws, use 2 in (5.1 cm) self-tapping sheet metal screws, or go with the length specified in the installation guide. Align the first section’s pre-drilled holes with the top of the gutter’s lip, then drive the screws into the gutter with a cordless power drill.

Self-tapping screws are designed drill their own hole, so pre-drilling holes into the gutter’s lip is unnecessary.

4. Cut miter joints where sections meet at corners.

If you’re installing surface-tension guards, 2 adjoining sections that meet at a corner will need miter cuts. Use a miter box or protractor to measure a 45-degree angle at the end of a section, mark your line, then cut the edge with tin snips or a utility knife.

Cut a corresponding angle in the section that will join with the first. Double check that you’ve aligned the 2 sections correctly before cutting.

When lined up with each other, the 45-degree slants in each section should meet flush so the 2 sections form a 90-degree corner, or a right angle. Make sure the inner and outer sides of each section face the right direction.

5. Seal the screws with roofing cement.

After you’ve installed a guard section, dab a small amount of roofing cement over the screw holes. If you’re installing mesh guards, take care not to clog any openings with cement.

Sealing the screws helps ensure water will flow into the gutter instead of running through the holes in the lip.

6. Trim excess lengths of guard with tin snips or a utility knife.

Repeat the steps to install sections until you’ve reached the end of the gutter run. Then measure the remaining distance between the last full section and the end of the gutter. If necessary, use a pair of tin snips or a utility knife to cut a guard section to match the remaining length of gutter.

Method 3 of 3:Choosing a Gutter Guard System
1. Measure your gutters’ height, width, and length.

As with any other home project, measure twice and cut once. That way, you’ll know the size and amount of guard material you’ll need. Additionally, knowing the total length you’ll need will help you set your budget and compare prices.

As insurance, plan on purchasing about 10% more guard material than your gutters’ total length.

2. Go with mesh guards for an easy, affordable option.

3. Choose surface-tension hoods for the most durable option.

Surface-tension covers curve over a gutter, allow water to drip inside, and block debris from entering. They typically last longer, stand up better to the elements, and generally require less maintenance than screens and grates.

Cost and complexity are the major drawbacks. At $6 to $10 (U.S.) per foot (30.5 cm), they’re expensive. Some models must be professionally installed, which can push the cost per foot (30.5 cm) up to $15 to $20.

If your gutters’ pitch is too steep, they may need to be rehung or the opening between them and the cover will be too wide. In addition, if you want an inconspicuous option, most gutter covers are bulkier and more obvious than screens.

If you’re budget-conscious and don’t want to hire a professional, consider PVC surface-tension covers. They’re not as durable as metal covers, but they’re cheaper and easier to carry up a ladder.

4. Purchase snap-on guards if convenience is your priority.

Both surface-tension covers and mesh screens come in snap-on and screw-fastened varieties. Regardless of the gutter guard system you choose, you’ll need to remove the guards and clean your gutters periodically. If convenience is a priority and you're less worried about weather damage, go with a snap-on option.

There are also screen guards that are simply wedged into a gutter. They cost as little as $0.10 per foot (30.5 cm), but they’re ineffective. With no fasteners at all, they don’t keep out debris, and they easily become dislodged.

5. Look for screw-fastened guards if you live in a windy or stormy area.

Snap-ons are easier to install and remove, but they’re more susceptible to strong winds, heavy rain, falling branches and snow. For the sturdiest option, go for guards that are fastened to the gutter with screws.

Screw-fastened products require more work and are usually a bit more expensive than snap-on versions.

6. Steer clear of foam inserts and brushes.